STEP 1: Get your prescription and pupil distance measurement.
STEP 2: Choose a lens type.
STEP 3: Choose a lens material.
STEP 4: Choose a lens model.
STEP 5: Choose lens options
STEP 6: Add the lens to the shopping cart, and check out
Eyeglass Lens Types
The lens type you choose is determined by your lifestyle and your needs. It is not determined by your doctor, although a doctor can help you make your decision. If you need your glasses only for distance vision, or only for reading, then single vision lenses are the best choice. If your prescription has a reading addition AND you want your lenses for both distance and reading/computer vision, then you want multifocal lenses: progressive, bifocal, or trifocal. We offer just about all eyeglass lens types, but here is a list of the types of eyeglass lenses we offer: Single vision, progressive, bifocal,l, reading glasses lenses, computer glasses, prescription sunglasses, fashion tinted lenses, polarized lenses, sun-sensitive “Transitions” lenses, and non-prescription lenses. Your prescription and needs will limit the eyeglass lens brands that are available to you.
Eyelensathome Lens Materials
Once you have determined the type of lens that you want, you must choose a lens material. In general, if your prescription is below +/-4.00, then CR39 plastic lenses are good for you. If your prescription is above that, you should look for a higher index lens such as polycarbonate 1.59 index, or higher.
Polycarbonate lenses are also recommended for children and sporting adults, in order to provide additional eye protection. Also, if your eyeglass frames have a rimless design, you should choose Trivex material which is strong enough to resist cracking, crazing, and chipping.
In each category, we usually offer three choices – good, better, and best. As you go up in price, you get a better lens with more features.
Eyelensathome Lens Options
We offer every option you can think of for eyeglass lenses. For example: we provide free scratch resistant coating on all lenses; anti-reflective coating (AR coating), 100% ultra-violet protection (UV protection), Crizal no glare coating, tinting (any color), fashion tint (any color), double gradient tint (any color) flash mirror coating, mirror coating, edge polishing, and more.
Eyelensathome Lenses Made with Glass
In the past, eyeglass lenses had always been made with glass. With the advent of high quality plastics in the last 20 years, glass lenses have been replaced almost completely with plastic lenses. Glass lenses have a slightly better optical clarity than plastic lenses and do not scratch as easily. However, glass lenses can shatter and cause serious eye injury. We do offer glass eyeglass lenses, but you need to allow 2-3 weeks for fabrication, and there is no warrantee against cracking or chipping.
Prescription Lenses FAQ Frequently Asked Questions
Are Cheap, Low Quality Lenses Bad for Me? Bad lenses leave you with bad vision. If you cannot see properly, you are hurting your productivity, causing additional eye strain, and you are missing details in the landscape which could harm you. Lenses are an essential tool in your daily life, and are well worth paying for the best quality you can get.
Can I Order Replacement Lenses for my Frames? Yes, you can order replacement lenses for your frames using our Replacement Lens Service. After you place the order, you will receive a free shipping label, Then you simply mail you glasses to us and we will fitted lenses.
Can I Hurt My Eyes with the Wrong Lenses? There is no clinical evidence to suggest that looking through lenses with the wrong prescription or papillary distance configuration can cause damage to your eyes. However, there could be other undesirable consequences (especially for people with stronger corrections), such as headache, dizziness, double vision, and vertigo. Some of these effects could cause a dangerous situation if you are driving, handling machinery, or otherwise reliant on your eyeglasses for your safety or the safety of others. You may experience some of these effects with a new pair of prescription eyeglasses, or a new prescription. The effects could fade over time, but we strongly suggest that you visit your local optical professional in order to determine the best course of action.
Can I Buy Prescription Lenses From One Store, and Have They Installed Elsewhere? It is highly discouraged. Prescription eyewear lenses cannot be separated from lens installation. Lenses must be purchased and installed by the same company. However, it is possible to buy prescription frames from one store and have the prescription glasses lenses installed at a different store.
My Frames Are Broken, But My Lenses Are Still Good? Can I Re-use Them? Prescription glasses lenses can often be re-cut to fit new prescription frames, but there are some restrictions. The new prescription frame must either be the exact same frame model and size as the broken frame or it must be smaller in every dimension (height and width). We do have a “Replacement Frame” service. Send a description of the frame and the problem to email@example.com, gives us a couple days, and we will get back to you with some options.
Does It Matter Which Lens Brand I Choose? Your choice of prescription lens brand is a personal decision, which is generally a tradeoff between price and quality. In general, better quality brand merchandise is more expensive. In prescription lenses, a more expensive lens usually means a better quality lens, or a lens with a wider viewing area (in the case of progressive lenses). In some cases however, it may be difficult or impossible for a consumer to notice the difference between a high quality prescription lens and a low quality lens. Anti-reflective and scratch-resistance coatings typically adhere better to the lens if they are applied by the lens manufacturer than if it is applied by a lens laboratory.
Do You Sell Prescription Safety Glasses? No, we do not sell safety glasses at Eyelensathome.com. There are many different types of safety lenses and eyeglass frames depending on your job or your activity. Safety glasses should only be dispensed in consultation with your eye doctor and local optical professionals.
How Do I Buy Children’s Glasses? We offer a selection of prescription glasses for childrener recommend essilor junior The best way to begin fitting your child for prescription glasses is to get the child’s PD measurement. When you have it, you should call our customer service department and discuss the needs of your child, and we can either find the perfect prescription glasses for your child or refer you elsewhere.
How Do I Order Prescription Sunglasses? You can build prescription sunglasses the same way as prescription glasses. Begin by selecting a pair of eyeglass frames or sunglass frames that can hold a prescription. Lower quality sunglass frames are not designed to hold a prescription lens, and are called non-Rx-able. Rx-able sunglasses are sunglass frames that can accept a prescription lens.
Plastic Lenses – 1.56 Index
Most lenses are plastic (glass is still available, but heavier and more expensive), but the least expensive plastic used for eyeglass lenses is called CR39 hard resin lenses. Hard resin lenses are good for everyday use. These lenses have the least distortion of any non-glass lens. For children or active adults engaged in sporting activities, we strongly recommend polycarbonate (impact resistant) lenses. If the sphere on your prescription is higher than +/-3.00, you will benefit from the selection of a high index lens type. If the sphere on your prescription is higher than +/-4.00, we recommend a thin lens type. Thinner lenses have three advantages: they do not look thick, they do not magnify or minify your eyes when seen by others, and they are lighter.
Polycarbonate Lenses – 1.59 High Index
Polycarbonate lens material is the best choice for children, active adults, and sporting activities. Polycarbonate lenses are virtually shatterproof, provide the best eye protection of any lens, and includes 100% UV protection inherently. If the sphere on your prescription is +/-3.00 or higher, you should choose polycarbonate lenses. Polycarbonate lenses are very difficult lenses to tint and are not recommended for people who want custom dark sunglass lenses (we suggest Trivex lenses in this case). The suggested prescription range for polycarbonate lenses is plano (0, no Rx) to +/-6.00 sphere.
High Index Lenses
High index lenses with 1.60 high index are good for people with prescriptions over +/-4.00 sphere, because they are thinner and lighter. Thinner lenses have three advantages: they do not look thick, they do not magnify or minify your eyes when seen by others, and they are lighter. The suggested prescription range is +/-4.00 to +/-8.00 sphere. Thinner, lighter and more expensive than mid-high index or hard resin lenses, high index lenses are a good choice for every day use.
High Index Lenses
High index eyeglass lenses refer to one of several different kinds of plastic lens material. Eyeglass lenses all have a definite “index”, which ranges from 1.50 to 1.74. For strong prescription, the higher the index, the thinner the lens; for weak prescriptions, a low index lens will be no thicker than high index eyeglass lenses. As a result, if you are looking for the “thinnest eyeglass lenses” for your prescription, read more so you do not pay extra money for lenses that are not thinner. Most people are looking for the thinnest eyeglass lenses, but “thinnest eyeglass lenses” differs from prescription to prescription.
High Index Polycarbonate, 1.59 Index
If your prescription is under +/- 3.00 spheres, a 1.56 index CR-39 lens is the best index for you, because a higher index lens will be more expensive and not thinner. In this article we talk about the thinnest eyeglass lenses for your prescription, but this is a very general discussion. There are a billion different prescription combinations, and there are several factors in each prescription making it unique. We have found an excellent tool online to find out exactly how much thinner a lens and high index choice will be for your exact prescription: LENS THICKNESS TOOL
High Index Lenses – 1.67 High Index
High index lenses with 1.67 high index are good for people with prescriptions over +/-6.00 sphere, because they are thinner and lighter. Thinner lenses have three advantages: they do not look thick, they do not magnify or minify your eyes when seen by others, and they are lighter. The suggested prescription range is +/-6.00 to +/-8.00 sphere. Thinner, lighter and more expensive than mid-high index or hard resin lenses, high index lenses are a good choice for every day use.
High Index Lenses – 1.70 and 1.74 Ultra High Index
High index lenses with 1.70 high index and 1.74 are the thinnest lenses on the market, and are made only for people with the highest prescriptions. If your prescription is lower than +/- 6.00 spheres, there is no need for you to spend the extra money for an ultra high index lens. If you do have a strong prescription, however, the 1.70 and 1.74 high index lenses will be a good deal thinner than the 1.67 and 1.60 high index lenses; the higher your prescription, the thinner the lenses will be.
What is Lens Index
The “Index” of Lenses is a term you will often hear, especially high index, mid index and low index eyeglass lenses. The “index” that is being referred to is the refractive index of a lens material. The higher the index number of a given lens material, the more the light will refract as it enters. If a lens material has a greater ability to refract light, less of a curve is required to obtain a specific power. Less curve results in a thinner eyeglass lens. Both the standard plastic CR-39, and glass are considered base or low index with an index of 1.498 for CR-39 plastic lenses and 1.52 for lenses made from glasses. When you see an eyeglasses lens index over 1.58 or greater it is considered high index.
Progressive lenses were first introduced in the 1990’s as a new lens product that offers multifocal vision “without the line”. Lens companies realized that aging customers did not like other people seeing the visible bifocal line for cosmetic purposes. So the progressive “no-line” lens was invented, and marketed well under such names as Varilux Lens, Varilux Comfort, Varilux Definity, and Varilux Physio. This was great news for the eyewear industry because this lens was much more expensive than single vision or bifocal lenses, which meant more money for the companies selling them. Optometrists regularly “prescribe” progressive lenses to people above 40 years,
Outside of the cosmetic benefits; progressive lenses offer the convenience of having distance and reading vision in one lens like a bifocal. Unlike a bifocal, however, the progressive lens also offer the mid-range and a continuous viewing area in the middle of the lens. On the negative side, progressive lenses have large areas in the patient’s visual field that cannot be seen through, thus causing blind spots, and this can lead to headaches and nausea during the adaptation period (it takes time for a person to adapt his body and lifestyle to these types of lenses). Also, to use a progressive lens, the patient must learn not to move the eyes from side to side, but to move the head from side to side. At eyelensathome, we urge patients to choose the right lens for their needs, desires, and pocketbook. In most cases, patients are more than capable of learning about eyeglasses, and making their own informed choices, along with advice from the eye doctor.
Progressive lenses, which are sometimes called no-line bifocals, are actually trifocal lenses without the visible lines. Progressive lenses were developed because many people wanted the convenience of not having to change their glasses to read, but they did not like other people to see the visible line. Also, with progressive lenses there is a continuous transition from one viewing distance to the next,so there is no large jump from near to far as there is in bifocal lenses.
How Progressive Lenses Work
If you need vision correction for both distance and reading, then can use two pairs of glasses, and alternate depending on what you need to see. Or, you can choose bifocal lenses, trifocal lenses, or progressive lenses (called multifocal lenses). Many people find it convenient not to be required to remove their glasses and switch to another pair in order to read something. Multifocal lenses divide the lens so that part of the lens is for reading and part of the lens is for distance vision. Bifocal (two areas) and trifocal (three areas) lenses have visible lines that separate the different areas of the lens.
Progressive Lens Design
Progressive lenses offer the convenience of multifocals, but without the visible line. However, progressive lenses are much harder to use and to adapt to than bifocal or trifocal prescription glasses, and they are much more expensive. In order to create a no-line progressive lens, there are two large areas of the lens that you cannot see through. Imagine what an hourglass looks like. This is the shape of the area of the progressive lens that you can see through. Objects seen through the areas of the lens to the left and right of the narrow middle section are highly distorted and you cannot see through them. The bulge areas at the bottom and top of the lens are for near and distance vision, and the thinner corridor connecting them is for intermediate distances. On either side of the narrow portion of the hourglass objects will appear blurry. In general, more expensive progressive lenses like Varilux lens have a wider corridor, and less expensive lenses have a narrower corridor that can restrict the viewing area considerably. On smaller lens sizes, it is necessary to slice off a portion of the bottom (reading section) of the lens in order to install the lens in the frame. As a result, the smaller the frame size, the smaller will be the reading portion of the lens.
How to Adapt To Progressive Lenses
In order to use a progressive lens, you must learn to move your head to see things; you cannot just move your eyes because you will be looking through a blurry part of the lens. This is called adapting to the lens. Most people can adapt within a month, but some people never adapt. It is common to experience dizziness and headaches during the time that you are adapting. Getting accustomed to progressive prescription glasses can be difficult, and you must have proper instruction by an eyecare professional. Sometimes, people who try progressive prescription lenses for the first time have a difficult time learning to look through the appropriate portion of the lens at the right time. Often a simple fitting adjustment to your prescription eyewear by your local optical professional can make all the difference.
Fitting Progressive Lenses
To fit progressive lenses (and any multifocal lenses) properly, the eyeglass frames must first be fit and adjusted to your face. At this point, an optical professional measures the segment height of your lenses. He makes two dots on the lens, one at the bottom edge of your pupil, and the other at the intersection of the lower eyelid and your eye. The measurement in millimeters from the bottom of the lens up to each dot is the segment height. To make any multifocal lens, we must have an accurate segment height measurement. If you send us a pair of glasses with multifocal lenses in them, we can read the lens and determine the seg height and make a perfect copy (replacement lenses for your glasses). But that segment height is specific to each pair of eyeglass frames and cannot be used for a different pair of frames. You can ask your local optical professional to measure the seg height for a pair of eyeglasses, and then send them to us with the markings on them. We can then make multifocal lenses. Or follow this link to learn
If you want to buy new eyeglasses or sunglasses with progressive lenses, or if you want to send us glasses without progressive lenses in them already, eyelensathome can supply you with a progressive lens using our EYE Fitting System). Our EFS is a system that estimates how to mount the lens so that it will work for you. As a result, our EFS is not as accurate a fitting system as you would receive from a local optical professional.
The EFS is a system that estimates your seg height. You have a conversation with our optical professional who will ask you questions about your experience with multifocals, the frame model you want to use, how you intend using the lens, and so forth. In the end, we are able to make a lens that works for about 85% of our clients. If we make a lens that does not work for you, we have a 100% return policy on lenses. To begin this process, you must first have your prescription and pupilary distance “PD” measurement. Our optician will need this information in order to design the right lens for you. <
How To Choose a Frame For Progressive Lenses
There is only one major restriction on the kind of frame that will accommodate progressive lenses. The eyeglass frame needs to have a height of 30mm or more. Height is referred to as the B measurement of the frame, and is the inside measurement from the bottom to the top of the lens aperture in the frame. If you have fallen in love with a frame that has a B measurement of 27mm to 29mm, there are some new short corridor lens choices that may work for you.
Bifocal lenses have a visible line in the middle of the lens, and the bottom part of the lens is the area your eyes look through when reading. Bifocal lenses have been around for decades. Until the introduction of progressive lenses in the 1990’s. bifocal lenses were used by everyone that wanted the convenience of near and far vision correction in the same pair of eyeglasses. If you need vision correction for both distance and reading, then you can use two pairs of glasses, and alternate depending on what you need to see. Or, you can choose bifocal lenses, trifocal lenses, or progressive lenses (called multifocal lenses).
Many people find it convenient not to be required to remove their glasses and switch to another pair in order to read something. Multifocal lenses divide the lens so that part of the lens is for reading and part of the lens is for distance vision. The bifocal lens (two areas) and trifocal (three areas) lenses have visible lines that separate the different areas of the lens. Bifocal lenses are typically made in the Flat Top 28 style, but we also offer the upgrade lens options to the Flat Top 35 and Executive Bifocal or Franklin Bifocal Styles.
How to Choose a Frame for Bifocal Lenses
There is only one major restriction on the kind of frame that will accommodate bifocal lenses. The eyeglass frame needs to have a height of 28mm or more. Height is referred to as the “B” measurement of the frame, and is the inside measurement from the bottom to the top of the lens aperture in the frame. If you have fallen in love with a frame that has a B measurement of 27mm to 29mm, there are some new short corridor bifocal lens choices that may work for you. Contact eyelensathome customer service for more information.
Best Progressive Lenses
What makes the best progressive lenses? In our opinion, the best progressive lenses are the progressive lenses that have the best optical clarity, and the widest corridor (the viewing area in the middle of the lens). With the widest corridor of any progressive lens on the market, Varilux ,Kodak,Nikon,hoya lenses are the easiest and most comfortable lenses to wear.
Eyelensathome has an excellent service to replace the progressive lenses in your glasses with new progressive lenses with the same or a new prescription. Replacing progressive lenses is simple to do: you send us your glasses, we copy the measurements from the lenses and make new lenses.
comfortable. With clearer vision when looking down, Definity® makes going up and down stairs, playing golf or tennis, or navigating uneven surfaces easier.
Anti-Reflective (AR) Lens Coating
Anti-reflective coating (aka, no-glare, AR) is a series of layers that is adhered to the back and front surface of a lens, or just the back of the lens if the lens is polarized. The purpose of no glare coating is to help reduce the amount of reflections on the lens. Consisting of metal oxides, each layer is a thin film that is designed to block a specific wavelength of light. The more layers of film, the more wavelengths that are blocked. AR coating causes the light that reflects from the inner and outer surfaces of each film layer to become equal, thereby canceling each other out.
Do you remember back in the 1990’s when anti-reflective AR coatings regularly flaked, stained, and got psychedelic colors? It was a nightmare for opticians because customers got angry and would blame them for selling an expensive coating that did not perform well. Well, the clock has turned and anti-reflective AR coating is now completely reliable, whether you choose the more expensive Crizal AR coating, or the less expensive AR coatings that are available. Yes, if you leave your glasses on the dashboard of your car in mumbai, the anti-reflective AR coating could show signs of stress, but this falls in the category of abuse. Anti-reflective AR coating does cost an additional Rs 300 to RS 500depending on the lens it is coating, but there are significant benefits to anti-reflective AR coating.
Whether it is right for you – if it is worth the extra cost – is your decision. Your glasses will work fine without AR coating, but the relaxation to your eyes and improved vision may be worth it.
Benefits of Anti-reflective AR Lens coating
Anti-reflective AR coating allows 8% more light to enter the eye. It doesn’t sound like much, but that 8% of light was bouncing off the outside of the lens, causing other people to see a shiny spot on your glasses and preventing them from seeing your eyes. Also, when a light source is overhead or behind you (as is often the case), light reflects off the inside of your lens and bounces into your eye, increasing eye fatigue. When there is more available light to your eye, you can see better and more clearly. The result is a clearer, sharper vision and reduced eyestrain, which would benefit everyone. In some situations, the benefits are more noticeable:
Workplace – Fluorescent lighting, computer screens, cash registers etc. all cause an increase of reflections in the workplace. This increase in reflections causes eye straing, headaches, fatigue and a decrease in work productivity.
Night Driving – External reflections are a major problem when it comes to driving safely at night. The reflections from oncoming headlights, streetlamps, and the road can cause distractions and discomfort to the driver. Internal reflections can cause ghost images and result in a decrease in reaction time.
Sunglasses – Anti-reflective AR coating on the back side of sunglass lenses eliminate some problems. First is the annoying image of the eye that is reflected in the center of the lens and can be very distracting. Second is the glare hazard that is caused by the mirror effect of a dark lens. With sunglass lenses, light from behind the wearer can be reflected directly into the eye from the back of the lens surface, causing discomfort.
Cosmetic – Without anti-reflective AR coating, reflections on the lenses will prevent people from seeing your eyes. Actors, newscasters, and businessmen prefer AR so that their audience and associates can clearly see their eyes.
Premium AR Lens Coatings
Eyelensathome offers three basic types of coatings. On our least expensive lenses and within a restricted prescription range, anti-reflective AR coatings are an extra Rs 400. This is possible because the lenses are coated in a mass production of tens of thousands of lenses. On other lenses that are custom made, we offer a 2000 anti-reflective AR coating which is an excellent coating. However, it is not quite as good at the premium Crizal AR coatings offered by Essilor. Anti-reflective AR coatings always work better when they are made by the same maker as the lens itself. For example, Zeiss AR coatingworks best on Zeiss lenses, Pentax AR coating works best on Pentax lenses, and Crizal AR coatings work best on Essilor and Varilux lenses. The reason for this is that the manufacturers each have their own formula for the underlying lens. That formula bonds best to an anti-reflective AR coating that is of the same chemical family. Premium anti-reflective AR coatings are actually bonded to the lens surface, becoming one with the lens.
Crizal No Glare AR Lens Coating
Crizal is the best known anti-reflective (AR) coating on the market, and also the best and the most expensive. Before you choose Crizal, think carefully about whether you even need or want anti-reflective coating on your glasses. Anti-reflective AR coating is chosen by 28.5% of eyewear shoppers in the United States, compared to 50-90% in Europe. There are many reasons that could contribute to this gap, but the primary reason is probably the bad history that anti-reflective AR coating had in its early years. In the 80’s and 90’s, anti-reflective AR coatings had a single layer which would craze, scratch or smudge easily. Today’s AR coatings includes a harder layer of scratch resistant coating, in addition to oleophobic (anti-oil), hydrophobic (anti-liquid), and anti-static layers. These extra layers help to repel the things that lead to smudging and scratching. They also help to make the lenses easier to clean and thereby reduce surface scratches from excessive cleaning.
Crizal® has become the industry standard term for a high quality lens coating. Made by Essilor, the world’s largest lens company, Crizal® sets the standard for durability and scratch resistance for eyeglass lens coatings. Essilor originally introduced Crizal® , but later that technology was superceded by Crizal® Alize®, and then Crizal® Avance™. Crizal® is not used much anymore, and it is almost always dispensed as Crizal® Alize® or Crizal® Avance™.
Crizal Anti-Scratch Warrantee
Crizal is known for its “No Glare”/Anti-Reflective properties, but it also includes a super hard coating. Essilor is so confident about this super-hard coating that it provides a one-year, anti-scratch warrantee: If you scratch your lenses (in normal wear and tear), they will replace the lenses (same prescription) at no charge. Just send the glasses and the lenses back to eyelensathome and we will process it for you.
Crizal® Lens Brands
is a coating that combines anti-reflective technology with a unique formula that also block harmful blue light. Blue light harms the retina, and is among the risk factors for the onset of age-related macular degeneration.
eyelensathome, we can quote you an ony lens, just give our customer service department a call.
Transitions® Photochromic lenses are lenses that darken when exposed to UV light, such as when you walk outdoors. When you are no longer exposed to the effects of UV, (i.e. walk indoors), the lenses return to their clear state. Transitions® lenses are a brand of lenses made by Essilor, the world’s largest lens company, and Transitions® photochromic lenses that block 100% of harmful UVA and UVB rays. Many people love the convenience of photochromic lenses, as they can have the convenience of both regular eyeglasses and sunglasses in just one pair of lenses.
Do Transitions® Lenses Protect Against UV Rays?
Yes, they block 100% of both UVA and UVB rays
Do Transitions® Lenses Reduce Glare?
Yes, they become dark light sunglasses when exposed to bright sunlight. If the light conditions are reduced (clouds, windshield, trees, etc), the tint level automaticall adjusts.
Using Transitions® As Sunglasses?
Transitions® lenses automatically darken depending upon the amount of UV radiation present. The brighter the sun, the darker Transitions® lenses get, all the way to as dark as most sunglasses. So, they help enhance the quality of your vision by reducing the sun’s glare in different light conditions; on bright sunny days, on cloudy days and everything in between. However, since extremely high temperatures tend to affect lens performance, original Transitions® lenses may not always get as dark as sunglasses. Also, since they are activated by UV exposure, original Transitions® lenses don’t work behind the windshield of a car since your windshield actually blocks UV rays. As a solution to hot weather performance and behind the windshield activation, Transitions® launched Transitions® XTRActive™ lenses. These lenses are the darkest everyday photochromic lenses on the market. They offer superior darkness in all temperatures, thus delivering excellent sun protection for those who spend a lot of time outdoors. In addition, these lenses offer a slight tint indoors and activate moderately behind the windshield of a car.
How Do Photochromic Lenses Work?
Photochromic lenses – such as Transitions® – contain a special dye that causes the lens to darken when exposed to ultraviolet sunlight rays. When the UV light diminishes, the lenses get clearer. However, the level of UV protection does not change – Transitions® lenses always provide 100% UV protection.
Are Transitions® Lenses A Good Alternative To Clear Lenses?
Yes. Photochromic and Transitions® lenses are as clear as clear lenses indoors, and as dark as most sunglasses outdoors in bright sunlight. As light conditions change, the lenses adjust quickly to provide the appropriate level of tint. Photochromic lenses are compatible with all frame styles, and are available in all types of lens materials and designs.
How Fast Do Transitions® Lenses Work?
Transitions® lenses begin to darken the moment they are exposed to UV light. The greater the intensity of UV radiation, the darker the lenses become. The moment UV rays are no longer present; the lenses begin to fade back. In short, Transitions® lenses quickly darken when you go outdoors, and fade back fast when you return indoors. Most wearers report the adjustment happens so smoothly that they are unaware of it. They are aware, however, of their continued visual comfort.
Are Transitions® Lenses Suitable For Driving?
Windshields in today’s vehicles block most of the UV rays that cause Transitions® lenses to activate, or darken. As a result, just like clear lenses, most Transitions® lenses do not activate inside a car. An exception is Transitions® XTRActive™ lenses which feature moderate activation behind the car’s windshield, improved darkness in hot outdoor conditions, and a slight indoor tint. Special-purpose driving lenses have been developed that combine polarized lens technology with Transitions® technology. These lenses carry the name Drivewear™.
Are Transitions® Lenses Appropriate To Wear While Working at a Computer?
Yes. They can be worn any place that you would wear regular, clear lenses all day, every day. Transitions® lenses help you see more comfortably inside and out, day and night.
Are Transitions® Lenses Available In Different Lens Designs?
Yes. Transitions® products are available for virtually every prescription, material and lens design. They are also available in shatter-resistant, standard and high index lens materials. Regardless of your prescription or lens preference, you may choose either gray or brown Transitions® lenses. Transitions® lenses are also compatible with lens treatments and options such as anti-reflective (AR) coating, scratch resistant coating and edge polish (which removes the frosted look from lens edges).
Ultraviolet “UV” protection and UV coatings are an important consideration when buying eyeglass lenses. Most eyeglass lens materials already have 100% UV protection, and this list includes polycarbonate lenses, high index lenses, Trivex lenses, Transition lenses, and polarized lenses. Eyeglass lenses that do not have UV protection are the least expensive CR-39 lenses, and it is important to add a UV coating to these lenses, especially if the glasses will be worn outside. Most importantly, sunglass lenses that are CR-39 must also have UV protection in the form of UV coating .
Cheap flea market sunglasses often do not have UV protection or UV coatings; this is most dangerous because the tint causes the pupils to dilate, and then the eyes admit more UV radiation. UV Protection and UV coatings in eyeglass lenses have come to the forefront recently, but exposure to UV rays can cause “sunburns” to the eye, also known as photokeratitis. The damaging effects of UV rays may not develop until years later. In fact, UV damage is cumulative and has been linked to cataracts and macular degeneration later in life. The delicate skin around the eye and the eyelids is also susceptible to UV damage.
Why You Need Protection from Harmful UV Radiation
Many people routinely take precautions to protect their skin against UV rays but are unaware of the need to protect their eyes against UV damage. Research indicates that long-term, unprotected exposure to the sunlight can lead to age-related conditions such as macular degeneration, cataracts and other eye conditions that can compromise healthy sight. Most eye care professionals now recommend that people protect their eyes against UV exposure at all times.
UV protection and UV coatings in eyeglasses and eyeglass lenses are strongly recommended. PBA notes that no matter what time of year it is or what the weather forecast is, sunglasses that block 100 percent of UV-A and UV-B rays should always be worn in conjunction with a brimmed hat. Wrap-around sunglasses are best as they protect the eyes and the skin around the eyes. Some contact lenses may offer UV protection but they can’t protect the entire eye and the skin around it.
Our Lens Quality: Best In The World
We produce the highest quality eyeglass lenses available. If we don’t make your lenses perfectly, we will remake your lenses or refund 100% of your money. Guaranteed perfect lenses. How can we make this guarantee? Simple: we don’t make your lenses. Making perfect eyeglasses is a science and an art rolled into one. All of our lenses are made by our world’s lens-partner lab which has over 100 employees involved in making every pair of lenses.
Perfect lenses, guaranteed.
Essilor is the world leader in eyeglass lenses. Essilor created the first and finest progressive lenses (Varilux lenses, Varilux Definity®, Varilux Comfort®, Varilux Physio®, Varilux Ellipse®), the finest lens coating (Crizal), and the finest single vision lenses on the market today (Orma, Thin&Lite, and Airwear). But if none of these lenses appeal to you, we can also offer Zeiss, Transition, shameer, Rodenstock, Kodak,Nikon,Hoya, and other lens brands – just ask for a quote. To make perfect eyeglass lenses, getting the right lens is only half of the story. The other half is the lens installation. If you buy the best lens and it is installed wrong, you have wasted your money.
At Eyelensathome, you can be assured that you are getting the exact lens you ask for, and it is being installed with the very highest skill, attention to detail, and quality control.
What Is An Eyeglass Lens?
Eyeglass lenses are nothing more than a carefully carved block of clear plastic. Lens quality is determined by four factors:
1) The clarity of the plastic
2) the precision of the carving
3) the accuracy of the prescription and PD measurement, and
4) the accuracy of the cutting of the lens to fit your frames.
Who Makes The Lens?
Several groups are involved in the making of lens. A problem in any one of these steps can lead to less effective vision correction by the lens. A good provider of eyeglass lenses will have relationships with the best lens quality providers, but will also check and re-check every lens before dispensing it. The store you choose to make your lenses must insist on quality at every level in order for you to receive the best quality product. This kind of quality control is essential in order to ensure consistent results. –The maker of the plastic determines the clarity of the plastic: Essilor, Zeiss, Hoya,Nikon,kodak Rodenstock, many others. –The cutter of the plastic determines the precision of the carving. The plastic maker does the surfacing for stock lenses. The lens laboratory does the carving for surfaced lenses. –The eye doctor determines the optics for the lens such that it will work best for your eyes’ condition. An eyewear store employee measures the pupillary distance. –The person that cuts (“edges”) the lens for your frame installs lenses so that the optical centers match the pupillary distance measurement. This could be an eyewear store employee, or lens laboratory.
About the Lens Blank Manufacturers
Nowadays most quality lens plastic in made in the Far East. It is made in large pieces called blanks which are round about four inches in diameter and about half an inch thick. There are different types and qualities of blanks. The quality is determined by the clarity, meaning the absence of miasms (small bubbles or inconsistencies which can only be seen with a microscope). The lower lens quality and less expensive plastics have more miasms which, although you cannot see them with the naked eye, can still add up to decreased visual acuity. At Eyelensathome, we only use better or best quality lens plastic made by well-known plastic suppliers. It is very easy for any eyewear retailer to cut their lens costs by 50% by switching to lower quality lens suppliers. We inspect every lens that we receive at least three times to ensure that it meets our standards. All of our suppliers have unconditional return policies for defects in lens quality.
About Lens Laboratories
There are hundreds of lens laboratories around india, several in each state. A typical lens laboratory will do a minimum of a few hundred lenses a day with a large staff of highly trained and experienced technicians. A few optical stores have small surfacing facilities in each of their stores doing much smaller lens volume. To surface a lens, the lens laboratory takes the blank and puts it through a series of grinding machines, which grinds the surface the lens and shapes it exactly to the specifications of the prescription. Lens laboratories also provide other services like edging and mounting, which optical stores can choose to use or not, depending on whether they want to do that work themselves. As with any custom service, the quality of the surfacing and any other services that the lab provides– is determined by the experience and the expertise of the laboratory, its personnel, and the equipment it uses.
We only use labs that employ a large staff of highly trained technicians, doing a large volume of lenses every day. At Eyelensathome, we do none our own edging services ourselves, and all of it is done by our lens laboratories. Most of our orders require stock lenses; all of our custom surfacing work is done by lens laboratories. The laboratories that we use each have many years of experience and do thousands of lenses each week. Each lab that we use inspects each lens several times during the manufacturing process. When we receive the finished product from the lab, we do our own final inspection.